Why it’s important to tune up your Sprinkler System


You would be surprised at the number of homeowners who spend a fortune on sophisticated irrigation and sprinkler systems, only to then leave their costly investments at the mercy of harsh winter temperatures, unpredictable climates, and a laissez faire attitude to garden maintenance. Yet, the reality is that all sprinkler systems need care if they are to remain in tip top condition for as long as possible.

To extend the life of a sprinkler system and avoid (or at least delay) the need for sprinkler repair in Tulsa, homeowners are advised to perform thorough visual checks on vulnerable and exposed components both before the winter arrives and at its end. It is just as important to inspect the system for faults in early spring as it is in the colder months.

This handy guide to some of the most useful sprinkler system tune ups will help you keep your investment running and put off the need for sprinkler repair in Tulsa. However, if you do need to find reliable sprinkler repair in Tulsa, look for a company with good testimonials and a great ‘word of mouth’ reputation.

Avoid the Urge to Rush

It is not uncommon for all the signals to be pointing towards the full bloom of spring, but for the ground beneath a lawn to remain rock solid. This is bad news for sprinkler systems, because they can overheat and become permanently damaged if they are switched on whilst the soil is frozen. To make sure that the signals are correct, dig out a patch around 12 inches deep – if there is no frost, it is safe to turn the sprinkler system on.

Take Back Control

Once again, you really should try to avoid the urge to just jump back in without caution, switch the system on, and then forget about it. If you do not check for ground frost first, you might end up needing to call in emergency sprinkler repair in Tulsa. Plus, it is also a good idea to take a quick look at your timer and scheduling data – just to make sure that everything is as it should be and set to match your garden.

Inspect the Sprinkler Heads

The next step is to carefully inspect the sprinkler heads for blockage. This can take the form of pretty much anything – rocks, sand, soil, etc. – with the potential to obstruct the movement of water through the sprinkler components. It is important, especially when dealing with the sprinkler heads, to make sure that all outlets are free from blockage and providing water evenly. If this is not the case, the lawn or yard will receive uneven coverage.

Repair or Replace Nozzles

The reality is that sprinkler heads and nozzles are not created to last forever – they are intended to withstand a reasonable amount of wear and tear and then homeowners are expected to either extensively repair or replace them. With the help of reliable sprinkler repair in Tulsa, it should be easy (and affordable) to remove degraded components and fit brand new ones. This should be done at least once a year and more for heavy duty systems.


Leave a Reply

Your email address will not be published.